Reviewed by Matt Servini, founder of The Craft Distilling Business, a UK distillery design-and-build specialist.
An in house distillery is a working still installed inside your bar, hotel, restaurant or retail space, letting the venue produce its own gin, rum or vodka on site rather than buying it in. For operators it is both a margin play and a brand asset: you keep the supplier’s mark-up on every pour and give guests a reason to choose you over the competition.
This guide covers the revenue case, the licensing and safety realities under the UK’s current Alcohol Duty regime, the space you actually need, the staffing behind a still, and the experience upside that often makes the numbers work. Each decision below is best taken in order, because the production method you choose shapes the licence, the footprint and the kit.
Table of Contents
- What an In-House Distillery Is (and Is Not)
- The Revenue and Margin Case
- Buy-In Spirits vs Distil In-House
- Licensing: APPA, AWRS and the Duty Point
- Space, Ventilation and Safety
- Staffing and Training
- The Brand and Experience Upside
- Frequently Asked Questions

What an In House Distillery Is (and Is Not)
An in house distillery is a small commercial still installed inside a hospitality or retail venue, producing that venue’s own gin, rum, vodka or non-alcoholic spirit for sale across the bar and, where you choose, by the bottle. It is a genuine production unit that earns its place on the floor.
It is not a decorative copper prop, and it is not contract distilling done elsewhere on your behalf. The point is that the spirit is made where your guests can see it, by your team, to your recipe. That distinction matters commercially as well as legally: a working still you operate yourself carries a production margin and a marketing story that a bought-in bottle, however premium, simply cannot.
Three operator types tend to bring distilling in-house. A bar or cocktail venue wants a house spirit and a talking point that sets its list apart. A hotel or restaurant turns production into an experience that supports tastings, room packages and private hire. A retailer adds a working still as both stock and theatre, giving shoppers a reason to linger and buy. Each use case changes the kit, the footprint and the licence, so the decisions below are best taken in order rather than all at once.
It is also worth being clear about scale. An in house distillery is not a craft brand attempting national distribution from a back room. It is a right-sized production unit matched to one venue’s throughput, which is exactly why a compact still and a compounding method can make the project viable where a full-scale distillery would not.
The Revenue and Margin Case
The commercial logic is straightforward. When you buy in spirits, you pay for someone else’s brand, production and distribution before you pour a single measure. A bottle on your back bar has already passed through a producer’s margin, a distributor’s margin and often a wholesaler’s margin, and each of those layers is money that leaves your building. Distilling in-house collapses that chain: you carry the raw production cost and the alcohol duty, and you keep the margin that previously walked out the door with your supplier.
The duty itself is the one cost an in house distillery cannot design away, because UK Alcohol Duty is charged on the litres of pure alcohol in the finished product regardless of who made it. What changes in your favour is everything stacked on top of that duty. A bought-in premium gin carries a brand owner’s profit, marketing spend and trade discounting structure within its price. When you produce your own, those layers disappear and the difference falls to your bottom line, serve by serve.
That margin is most visible on a signature serve. A house gin and tonic or a venue-only botanical spirit can be priced as a premium, exclusive product precisely because guests cannot buy it anywhere else. Exclusivity removes the price comparison that erodes margin on recognised brands: a customer can check what a known gin should cost, but they have no reference point for yours. The still also drives footfall and dwell time, and a guest who stays for a second round or books a tasting lifts revenue well beyond the bottle itself.
There is a fixed cost to clear first: equipment, installation, licensing and training. None of that is trivial, and it should be modelled honestly against your expected production volume rather than assumed away. The return comes from volume and pricing over time, so an in-house distillery suits venues with the trade to use the kit and the brand ambition to justify it. Where the sums work, the still moves from being a line of capital expenditure to a standing source of high-margin revenue and repeat custom. It is a capital decision, not an impulse buy, and it rewards operators who treat it as a product line rather than a feature.
Having said that, many bars, restaurants, and hotels have installed micro distilleries to create interest and drive traffic to their venue without the intention of the additional margin from making the spirit in-house.
Buy-In Spirits vs Distil In-House
The table below sets out the practical trade-off across the factors operators weigh most.
| Factor | Buy-in spirits | Distil in-house |
|---|---|---|
| Margin per serve | Lower: supplier and distributor margin baked in | Higher: production cost and duty only |
| Brand control | Limited to your serve and menu | Full: your recipe, name and story |
| Licensing burden | Standard premises and retail licensing | Plus APPA and/or AWRS depending on method |
| Upfront cost | Minimal: stock only | Capital cost for kit, fit-out and training |
| Footprint | Shelf and storage space | A defined area with ventilation and a hazard zone |
| Differentiation | Shared with every venue stocking the same brand | A product competitors cannot replicate |
Neither route is universally right. Buying in suits a venue that wants range and low complexity. Distilling in-house suits one ready to invest in a product and an experience that are theirs alone.
Licensing: APPA, AWRS and the Duty Point
Licensing depends on how you produce, so settle the production method first. UK rules changed under the Alcohol Duty regime and many older guides are out of date.
If you distil from scratch, you need an Alcoholic Products Producer Approval (APPA) from HMRC before production begins. According to HMRC, you will not need an APPA if you “compound or rectify spirits using duty-paid alcoholic products,” which is how a great deal of craft gin is made. That exemption is what makes a compounded house gin one of the faster routes for a venue to get started.
Selling is separate from making, and the two requirements are easy to confuse. If you sell finished alcohol to other businesses, you need Alcohol Wholesaler Registration Scheme (AWRS) approval. According to HMRC, you must apply at least 45 days before you intend to start trading, and you cannot trade in wholesale until approval is granted. That 45-day window matters for planning, because it can sit on the critical path to your launch if it is left until late. Selling only across your own bar to the public does not by itself trigger AWRS, so a venue producing purely for its own service often avoids it entirely.
Two further requirements sit alongside the duty rules and apply to almost every venue. You need the right premises licence and a personal licence holder to sell alcohol to the public in the first place, exactly as you would without a still. You also need to register as a food business with your local authority before production starts, because spirit production is a food operation in the eyes of the law. Neither is onerous, but both should be confirmed early so they do not surface as a surprise close to opening. If you are weighing up the method before committing, our frequently asked questions cover the licensing, safety and equipment queries operators raise most often.
| Requirement | When it applies to a venue |
|---|---|
| APPA | Distilling spirits from scratch on the premises |
| APPA exemption | Compounding or rectifying with duty-paid alcohol |
| AWRS | Selling your finished spirit wholesale to other businesses |
| Premises and Personal Licence | Selling alcohol from the premises to the public |
| Food business registration | Register with the local authority before production |
We can map the right route for your method, and our distillery operating support covers the full HMRC process so the licence does not become the thing that holds your opening date.
Space, Ventilation and Safety
Distilling creates a flammable atmosphere, so safety and siting sit alongside licensing, not after it. The good news for operators is that a still can fit a surprisingly tight footprint, and a compact unit can work behind or beside a bar in space many venues already have.
The real constraint is the hazardous zone. Under the Dangerous Substances and Explosive Atmospheres Regulations 2002 (DSEAR), the Health and Safety Executive requires that places where an explosive atmosphere may occur are classified into hazardous zones, suitably controlled, and clearly marked. For an in-venue still that means proper ventilation, a defined zone around the equipment, and safe access designed in from day one. However, if a small still is going into a large room, ventilation is not necessary. Give Craft a Distilling Business a call, and we can provide advice.
A common and costly misconception is that all distilling equipment must be ATEX or UKEX certified. It does not. Only equipment located within a hazardous zone needs certification, and a still can often be designed with no electrical components inside that zone. That removes the need for a certified electrician to fit it and brings the cost down without compromising safety. This is one of the clearest examples of why the design of the still matters as much as the kit itself: a well-conceived layout keeps electrical components outside the zone by intent, not by accident.
The choice of still feeds directly into this. A traditional copper pot still suits gin and other character-led spirits and can be configured so the heat source and controls sit safely outside the classified zone. Material, heating method and the position of every fitting all influence how the hazardous zone is drawn and how easily the unit integrates into a customer-facing space. Every installation also needs Standard Operating Procedures and site-specific risk assessments, which document safe running, cleaning and shutdown, and which keep both your team and your insurer comfortable. Treating safety as a design input rather than a compliance afterthought is what keeps a still both legal and genuinely usable on a busy floor.
Staffing and Training
A still on the floor is only an asset if someone can run it. The good news is that you are not hiring a master distiller: you are training your existing team to operate a defined process safely and consistently.
Training covers the run itself, cleaning and maintenance, the safety procedures tied to the hazard zone, and the recipe so every batch tastes the same. For a customer-facing still, it also covers the patter, because staff who can explain what is in the pot turn production into a selling point.
This is where hands-on support matters more than a manual. Our turnkey approach builds training into the project, beginning before installation and continuing for as long as you need it, so the team is confident from the first run rather than the tenth. Staff turnover is a reality in hospitality, so the process should be documented clearly enough that a new starter can be brought up to speed without losing consistency in the glass. A still that depends on one irreplaceable person is a liability; a still your wider team can run is an asset that keeps producing through rota changes and busy seasons.

The Brand and Experience Upside
Margin is the reason most operators start the conversation. The experience is often what makes the project pay. A working still is a live attraction: it gives guests something to watch, ask about and photograph, and it gives your venue a story that a bought-in bottle never can.
That story compounds. A house spirit can anchor a signature cocktail list, supply branded bottles for retail or gifting, and headline tastings, masterclasses and private events that each carry their own revenue. The distillery stops being a cost on the balance sheet and becomes a reason people travel to you.
We design and build every distillery bespoke, around your space, your output and your brand, and we have installed in environments as tight and unusual as airports and cruise ships. You can see the scope of what that involves on our services page, or browse real installations on our distillery projects.
Frequently Asked Questions
What is an in-house distillery for a hospitality venue?
An in-house distillery is a small commercial still installed inside a bar, hotel, restaurant or retail space, used to produce that venue’s own gin, rum, vodka or non-alcoholic spirit on site. It is a working production unit and a customer-facing feature, not a decorative prop.
Do you need a licence to run an in-house distillery in the UK?
It depends on how you produce. Distilling from scratch needs an Alcoholic Products Producer Approval (APPA) from HMRC. If you only compound or rectify spirits using duty-paid alcohol, you are exempt from APPA. To sell to other businesses you also need Alcohol Wholesaler Registration Scheme (AWRS) approval, applied for at least 45 days before trading.
Is in-house distilling more profitable than buying in spirits?
It can be. Distilling in house removes the brand owner’s and distributor’s margin from every bottle and lets you sell a signature serve that competitors cannot copy. The upfront cost and licensing are higher, so the gain comes from volume, premium pricing and the experience the still creates.
How much space does an in-house distillery need?
Less than most operators expect. A compact still can fit a tight footprint behind or beside a bar, including unusual spaces. The constraint is rarely floor area: it is ventilation, a defined hazardous zone and safe access, all of which should be designed in from the start.
Does in-house distilling equipment need ATEX certification?
Not all of it. Only equipment located inside a hazardous zone needs ATEX or UKEX certification. A still can often be designed with no electrical components inside the hazard zone, which removes the need for a certified electrician to fit it and reduces cost.
References
Sources used in this guide, for readers who want the underlying regulation and research.
- HMRC. Excise Notice 39: spirits production in the UK. https://www.gov.uk/government/publications/excise-notice-39-spirits-production-in-the-uk
- HMRC. Registration and approval of excise goods held in duty suspension (Excise Notice 196). https://www.gov.uk/guidance/registration-and-approval-of-excise-goods-held-in-duty-suspension-excise-notice-196
- HMRC. The Alcohol Wholesaler Registration Scheme (AWRS). https://www.gov.uk/guidance/the-alcohol-wholesaler-registration-scheme-awrs
- Licensing Act 2003 (as amended). https://www.legislation.gov.uk/ukpga/2003/17/contents
- UKHospitality. Economic contribution of hospitality. https://www.ukhospitality.org.uk/insight/economic-contribution-of-hospitality/