Still gauge icon – The Craft Distilling Business

How to Make Gin Commercially: From Botanicals to Bottle

How to make gin commercially: the legal definitions, the base spirit, botanicals and infusion methods, the still's role, proofing and the compliance you need first.

Reviewed by Matt Servini, founder of The Craft Distilling Business, a UK distillery design-and-build specialist.

To make gin commercially you flavour a neutral base spirit with juniper and supporting botanicals, redistil or infuse it to the profile you want, then proof it down with water and bottle it at a minimum of 37.5% ABV. Before any of that you need the right HMRC approval and a still matched to the style of gin you intend to sell. This guide walks the full route from botanicals to bottle, in the order a founder actually meets it.

If you want to learn how to make gin commercially without the costly missteps, the order of operations matters as much as the recipe: settle the legal category, secure your base spirit and botanicals, choose your infusion method, size the still to your output, then handle proofing and excise. Each step constrains the next, so getting them in sequence is what separates a launch that lands on shelf from one that stalls at the approval stage.

Table of Contents

Adding botanicals to a still during commercial gin production

Gin, Distilled Gin and London Gin: Get the Definitions Right

The label you can legally use is decided before the first botanical goes in the still. Under Regulation (EU) 2019/787, retained in UK law, gin is a juniper-flavoured spirit drink made from ethyl alcohol of agricultural origin, bottled at a minimum of 37.5% ABV, where the predominant taste is juniper. Gin is not simply any botanical spirit: if juniper is not the leading flavour, it cannot be called gin.

The three legal tiers differ mainly by method. Plain gin can be cold compounded, which means the base alcohol does not have to be redistilled. Distilled gin must be produced by redistilling neutral alcohol with juniper and other botanicals, and approved flavourings may be added after distillation. London gin (often labelled London Dry) is the strictest: all the flavour must be imparted during distillation, no colouring may be added, and sweetening is capped at 0.1 grams of sugar per litre.

Style Method Min ABV Added after distillation
Gin Flavour ethyl alcohol with juniper; can be cold compounded 37.5% Flavourings, colouring and sweetening permitted
Distilled gin Redistil neutral alcohol with juniper and botanicals 37.5% Approved flavourings and sweetening permitted
London gin All flavour from distillation only 37.5% Water only; no colouring; sweetening max 0.1 g/L sugar

Decide the tier first, because it sets what you can add later and what you must put on the label.

Step 1: Start With the Base Spirit

Almost all commercial gin starts from bought-in neutral grain spirit, a high-strength, near-flavourless alcohol of agricultural origin. You do not have to ferment and distil your own base to make excellent gin. Most respected craft brands buy a neutral spirit and build their identity in the redistillation and the recipe, not in the wash.

This matters commercially for two reasons. Buying duty-paid neutral spirit and compounding from it is usually exempt from the Alcoholic Products Producer Approval, which makes gin one of the faster spirits to bring to market. It also keeps your capital focused on the still and the recipe rather than on a fermentation hall you may not need.

The base spirit’s quality still counts. A clean, well-rectified neutral spirit gives the botanicals room to speak; a rough base fights them. Choose a supplier and a grade you can secure consistently, because batch-to-batch variation in your base will show up as variation in your finished gin.

Step 2: Choose and Balance Your Botanicals

Juniper leads, by law and by character. Everything else is a supporting cast built around it. A typical commercial recipe runs to between six and a dozen botanicals, though more is not better: a tight, well-balanced recipe is easier to reproduce at scale and cheaper to source.

Common supporting botanicals fall into rough families: citrus peels for lift, coriander seed for a warm spice backbone, angelica and orris root to bind and fix the aromatics, and a signature botanical or two that give the brand its hook. The art is balance. Recipe development is where a gin brand is won or lost, and where founder-led formulation pays back fastest. Our distillery consultancy and turnkey service includes hands-on recipe development, including limited editions and alcohol-free alternatives.

Lock your botanical sourcing early, because it is the part of the recipe you control least. Juniper, the one mandatory botanical, is largely wild-harvested rather than farmed, with much of the supply gathered in Italy, the Balkans and other parts of southern and eastern Europe. That harvest pattern matters: a wild crop responds to weather and to local picking labour, so both the volume and the price of juniper can swing year to year, and a poor season tightens supply for every distiller at once. Treating juniper as a guaranteed commodity is one of the most common planning mistakes a new brand makes.

The same volatility runs through the supporting cast in different forms. Coriander seed quality varies by origin and crop year. Citrus peel can be sourced fresh and dried in-house for brightness or bought dried for consistency, and the two routes give noticeably different results. Roots such as angelica and orris are slow to grow and trade on a longer cycle, so a switch of supplier or grade can move your aromatic backbone. The practical point is that crop year, growing region, drying and storage all shift the essential-oil content of a botanical, which is what actually carries the flavour through the still. A recipe that tastes right in small trials can drift once you scale and once you move into a new harvest.

There are two defences against that drift. First, build tolerance into the recipe by leaning on a balanced core rather than one fragile hero note, so a single off-year ingredient does not unbalance the whole. Second, build genuine supplier relationships and hold enough stock of the slow-moving, supply-constrained botanicals to ride out a thin harvest. Specify grade, origin and moisture where you can, store botanicals cool, dark and dry to protect their oils, and taste each new delivery against a retained reference sample before it goes anywhere near a production run. Sourcing discipline, not exotic ingredients, is what keeps a commercial gin tasting the same from the first bottle to the ten-thousandth.

Step 3: Maceration vs Vapour Infusion

There are two main ways to move flavour from a botanical into the spirit, and some distillers use both.

Maceration steeps the botanicals directly in the base spirit, before or during distillation. It pulls out heavier, oil-rich compounds and tends to give a fuller, rounder, more robust gin. Vapour infusion suspends the botanicals in a basket above the liquid, so only the rising alcohol vapour passes through them. It extracts lighter, more volatile aromatics and gives a fresher, cleaner profile.

Method How it works Flavour result Typical use
Maceration Botanicals steeped in the spirit Fuller, heavier, oil-rich Juniper-forward, classic styles
Vapour infusion Vapour passes through suspended botanicals Lighter, brighter, fresher Delicate citrus and floral notes
Combination Heavy botanicals macerated, delicate ones in the basket Layered and complex Most modern craft recipes

Descriptive sensory evaluation by trained profiling panels confirms statistically significant differences in specific aroma and flavour attributes between steep-infused and vapour-infused distillates (Hodel et al., 2019)

However, there is insufficient peer-reviewed evidence available to verify whether an untrained typical consumer reliably distinguishes between macerated and vapour-infused gins in consumer discrimination or preference trials.

Neither method is inherently better. The right choice depends on the gin you are trying to build, and many recipes macerate the robust botanicals while reserving fragile citrus and florals for the vapour basket.

 

Step 4: The Still Does the Work

For distilled gin and London gin, the still is where the recipe becomes the product, so the still is the central piece of equipment, not an accessory. A copper pot still is the workhorse of gin production: copper interacts with the spirit during distillation, removes unwanted sulphur notes and helps deliver a clean, characterful result.

During the run you separate the distillate into heads, hearts and tails. Only the hearts, the clean middle cut, go into your gin; the heads and tails are discarded or recycled. Making those cuts consistently is a learned skill, and getting them right is what keeps every batch tasting like your brand.

Sizing the still is a commercial decision as much as a technical one, and it is worth working backwards from the output you actually need. A still is normally described by its total charge volume, the amount of liquid it holds for a run. Because gin is redistilled from neutral spirit that has been reduced with water before the run, the output will be dependent on the dilution.  In most cases, a still will produce more finished gin than the liquid it has been charged with.

To turn that into a sizing decision, start from a realistic annual target in bottles, divide it by the number of production days you can sensibly run, and account for the fact that each run also needs time to heat up, run slowly enough to make clean cuts, and cool and clean down afterwards. A still that looks generous on paper can become a bottleneck once those real timings are included, while an oversized still ties up capital and floor space you could spend elsewhere. It is usually wiser to size for the output you can sell in the first couple of years, with a clear path to add capacity, than to buy for a forecast you have not yet proven. If you are weighing up charge sizes and run times for your own numbers, our frequently asked questions cover the practical points founders raise most often.

For bars, restaurants and retail venues that want to distil in-house, a compact unit makes small-batch and experiential gin viable in a tight footprint. At commercial scale, stills are best designed around your space and output rather than bought off the shelf. You can see our range of bespoke gin stills, each engineered for the style and volume you are producing.

Step 5: Proofing, ABV and Bottling

Gin comes off the still far stronger than bottling strength, often above 70% ABV. Proofing is the controlled reduction down to your target, done by blending in water. Most premium gins land between 40% and 47%, because higher strength carries the botanical oils better and holds up in a mixed drink, but the legal floor is 37.5% ABV.

Water quality matters here. The water you proof with becomes a meaningful share of what is in the bottle, so it should be treated and consistent. Add it gradually, rest the gin, and check the strength with a calibrated hydrometer or density meter before bottling.

Proofing is also a duty and compliance point, not only a quality one. Your final ABV affects your excise calculation and must match what your label declares, so accurate measurement and record keeping run alongside the blending itself.

What You Need to Make Gin Commercially: Compliance Before You Sell

To make gin commercially, you cannot legally sell a drop until the right approvals are in place, and the rules changed under the Alcohol Duty regime that took effect in 2023, so older guides are out of date. The current requirement for scratch producers is an Alcoholic Products Producer Approval (APPA) from HMRC.

You need an APPA if you make alcohol from scratch, use duty-suspended alcohol, or change a product’s final excise classification. You are usually exempt from APPA if you only compound or rectify using duty-paid alcohol, which is how a lot of craft gin is made. Separately, selling finished gin to other businesses requires Alcohol Wholesaler Registration Scheme (AWRS) approval, which captures B2B sales at or after the duty point.

Excise duty is the part founders most often underestimate, and it is worth understanding the mechanics rather than treating duty as a flat add-on. Under the current regime, duty is charged by reference to the litres of pure alcohol in the product, so a stronger gin carries more duty per bottle than a weaker one of the same volume. That is the commercial reason proofing strength is a duty decision and not only a flavour one: the difference between bottling at 40% and 47% is a real difference in the duty you owe on every case. The duty point, the moment the liability crystallises, falls when the finished spirit leaves duty suspension, so where and when that happens shapes your cash flow. Accurate strength measurement and careful records sit at the heart of all of this, because your declared ABV drives the duty calculation and must match what is in the bottle and on the label.

Two further reliefs are worth knowing. Small Producer Relief gives qualifying smaller producers a reduced duty rate, which can meaningfully change the economics of an early-stage brand, so it is worth checking your eligibility before you model your margins. Spirits below 8.5% ABV sit in a different duty band, but as gin must be at least 37.5% ABV that lower band does not apply to a standard gin. The headline point is that duty, strength and category are bound together, and a decision made for flavour in the still room has a direct cost consequence at the duty point.

Labelling is its own discipline. The GOV.UK guidance on labelling spirit drinks sets out the category name, ABV, volume and producer details you must display, and the category you can claim depends on the method you chose in Step 1. Getting the approvals, the duty registration and the labelling lined up in the right order is fiddly, and a single missed step can hold up a launch; our distillery licensing support exists to keep that paperwork moving in step with the build.

Where Founder-Led Help Fits

Most people setting out to make gin commercially are founders with a brand idea and a space, not distillers yet. The gap between those two points is where projects stall: a recipe that will not scale, a still that does not suit the style, or a compliance step missed until it blocks the launch.

A turnkey approach closes that gap. It covers bespoke still design and build, installation, founder-led training and recipe development, licensing support and route-to-market advice, so the steps in this guide arrive in the right order and at the right time. The Craft Distilling Business designs and builds the distillery and supports the recipe; we do not contract distil on your behalf, because the brand and the spirit are yours to own. You can see the full scope on our services page.

Frequently Asked Questions

What is the legal definition of gin in the UK?

Gin is a juniper-flavoured spirit drink made by flavouring ethyl alcohol of agricultural origin with juniper berries (Juniperus communis L.), bottled at a minimum of 37.5% ABV, with a taste that is predominantly juniper. Plain gin can be cold compounded, meaning the alcohol does not have to be redistilled.

What is the difference between gin, distilled gin and London gin?

Plain gin can be flavoured by cold compounding without redistillation. Distilled gin must be made by redistilling neutral alcohol with juniper and botanicals, and flavourings may be added after distillation. London gin is the strictest: all flavour must be imparted during distillation, with no added colouring and sweetening capped at 0.1 grams of sugar per litre.

Do you need a licence to make gin commercially in the UK?

Yes. You need the correct HMRC approval before you produce for sale. Making alcohol from scratch or using duty-suspended spirit requires an Alcoholic Products Producer Approval (APPA). Compounding from duty-paid alcohol is usually exempt from APPA. Selling finished gin to other businesses needs Alcohol Wholesaler Registration Scheme (AWRS) approval.

What is the difference between maceration and vapour infusion in gin making?

Maceration steeps botanicals directly in the base spirit before or during distillation, giving a fuller, heavier flavour. Vapour infusion suspends botanicals in a basket above the liquid so the rising alcohol vapour passes through them, giving a lighter, fresher profile. Many distillers combine both methods in one recipe.

What ABV should commercial gin be bottled at?

Gin must be at least 37.5% ABV to be sold as gin in the UK. Most premium gins are bottled between 40% and 47%, because higher strength carries the botanical oils better and improves the way the gin holds up in a mixed drink. The spirit comes off the still much stronger and is proofed down with water to the target bottling strength.

References

Sources used in this guide, for readers who want the underlying regulation and research.

  1. Regulation (EU) 2019/787, Annex I, Categories 20-22 (gin). https://eur-lex.europa.eu/eli/reg/2019/787/oj
  2. HMRC. Excise Notice 39: spirits production in the UK. https://www.gov.uk/government/publications/excise-notice-39-spirits-production-in-the-uk
  3. HMRC. Excise Notice 47: duty free spirits, use in manufacture or for medical or scientific purposes. https://www.gov.uk/government/publications/excise-notice-47-duty-free-spirits-use-in-manufacture-or-for-medical-or-scientific-purposes
  4. OIML R 22 (2019). International alcoholometric tables. https://www.oiml.org/en/publications/recommendations/publication_view?p=r022-e75
  5. Buglass, A.J. (ed.) (2011). Handbook of Alcoholic Beverages: Technical, Analytical and Nutritional Aspects, Vol. 1, Ch. 4, Distilled spirits. Wiley. https://doi.org/10.1002/9780470976524
  6. Chartered Institute of Brewers and Distillers. Library and technical resources. https://www.cibd.org.uk/library/

Related articles

Fogg Micro Distillery Diagram – The Craft Distilling Business
Scroll to Top
Still gauge icon – The Craft Distilling Business
Have a project in mind?

Get a quote